 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: frontiersales@frontierusa.com Web: frontierusa.com Insert Molded Coil--2435 series A. Mechanical Drawing: B. Electrical Specification: Part No. 2435-01 2435-02 2435-03 2435-04 2435-05 2435-06 2435-07 C. Features: 1. Plastic molded. 2. High reliability. 3. Low cost. L Min. (uH) 0.0460 0.0620 0.0820 0.1080 0.1370 0.1760 0.2220 L Nom. (uH) 0.0475 0.0700 0.0980 0.1300 0.1650 0.2050 0.2450 L Max. (uH) 0.0485 0.0780 0.1140 0.1540 0.1930 0.2340 0.2680 Q Min. @ L Nom. 80 @ 50MHz 85 @ 50MHz 108 @ 50MHz 114 @ 50MHz 114 @ 50 MHz 112 @ 50 MHz 108 @ 40 MHz Color Brown Red Orange Yellow Green Blue Violet D. Measurement: 1. Q and L measured with 1/2" long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent 1/4" down from stand off at an angle of 90. 2. L min. measured with core halfway out of the top of the form. 3. Inductance greater than 0.1uH read at recommended Q meter frequency. 4. Inductance below 0.1uH calculated from readings taken at 50MHz. E. Test equipment: Q meter (HP 4342A) IMC 2435 series Mar. 15, 2002 Page 1 of 1 |
Price & Availability of 2435
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |